VBrick Systems EtherneTV v4.2.1 Portal Server, Admin Manual

Page: 165 / 180

NXG-to-VOD-W Content Migration
ETV Portal Server Admin Guide 153
Increasing the Ingestion Rate
You can make the migration process substantially faster by increasing the rate at which files
are ingested on the VOD-W server.
T
To increase the ingestion rate:
1. On the VOD-W server, go to
Start > Control Panel > InfoValue QuickVideo > QVCS >
Advanced
.
2. Set the
Transfer Rate
to
1000000
and click
OK
. Click
OK
again to exit.
3. When the content migration is complete, reset the
Transfer Rate
to the default (
10000
).
Running the Migration Tool
T
To migrate video files to the VOD-W:
1. Launch the Migration Tool. Go to
C:\Program Files\Vbrick\MCS\utils\
NXGtoVODWMigrationTools
and double-click on
VBMCSReplicateContent.exe
2. Complete all required fields as explained below.
3. Select
Save to File
to create a status file that will show which files were ingested
successfully.
4. Click
Start
to begin the migration immediately, or use the scheduling options to run later.
5. If necessary, when the content migration is complete, reset the
Transfer Rate
to the
default (
10000
).