background image

TIP

Using your machine

Using your machine

To produce steam squeeze 

the trigger in short bursts. 

Don’t hold the trigger 

continuously to prevent 

over saturation.

The Steam Reach wand can be used at different 

heights for hard to reach places.

To improve your 

comfort, use the 

additional handgrip 

on the handheld 

to support the unit 

and help you clean 

difficult to reach areas.

Standing behind the 

unit, press the handheld 

release buttons and 

carefully release the 

handheld from the 

steam wand.

Place the steam wand 

safely and securely 

to one side against 

a wall or fixed structure. 

Push the concentration 

tool onto the handheld 

and twist clockwise 

to lock into position.

Plug into mains and 

slide the On/Off switch 

to on. The green light will 

illuminate when it is ready 

to use. The steamer will 

automatically set to Max 

steam (no detergent).

2. ROTATE

1. PUSH

CAUTION:

 Always switch off the steamer and allow to cool before attaching/detaching the steam wand, floorhead, accessories 

and twin tank. Always stand securely against a wall/fixed structure. When using the steam reach wand do not aim towards 

electrical components such as light fittings, sockets and wiring.

IMPORTANT:

 Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.

Using the steam fresh reach handheld

Summary of Contents for VX36

























Reviews: