Vax VX36, Let'S Get Started

Page: 13 / 24

Using your machine Using your machine
When releasing the carpet
glider, ensure the steam
trigger is fully released
first. To release the carpet
glider, place your foot on
the clip and press down.
Lift steamer out of the
glider to remove.
After refreshing carpets,
switch off and unplug
the steamer. Allow the
steamer to cool down.
Hold the corner of the
microfibre pad down
with your foot and lift
steamer to peel away.
CAUTION: Always switch off the steamer and allow steamer to cool before attaching/detaching the steam wand, floorhead,
accessories and twin tank.
Always stand steamer securely against a wall/fixed structure.
When using the steam reach wand do not aim towards electrical components such as light fittings, sockets and wiring.
IMPORTANT:
Always check the accessories are clean and free from debris, don’t use if damaged, broken or worn.
Using the steam fresh reach wand
Press the steam wand
release pedal and pull
the steam wand and
handheld out of
the floorhead.
Use the arrows to align
the concentration nozzle
to the end of the steam
wand. Push the
concentration tool onto the
steam wand and
twist clockwise to lock
into position.
Plug the steamer into
mains and slide the
On/Off switch to On.
The green light will
illuminate when it is ready
to use. The steamer will
automatically set to Max
steam (no detergent).
2. ROTATE
1. PUSH
Press the centre pad
on the control panel
to select preferred
setting steam/detergent.