Vax VX36, Let'S Get Started

Page: 17 / 24

Taking care of your machine Using your machine
CAUTION:
Switch off the steamer and unplug from the mains. Allow the steamer to fully cool down before performing
any maintenance or troubleshooting checks.
Don’t leave water or detergent in the tanks between uses, as this can effect the steamer performance,
the water/detergent twin tanks need to be emptied and rinsed after each use.
IMPORTANT:
Don’t use bleach or fabric softener when washing the microfibre cleaning pad.
Always switch off the steamer and allow the steamer to fully cool down before removing
the microfibre cleaning pad.
Emptying the twin tank
Cleaning the microfibre cleaning pad
Press the twin tank release
button, grip the twin tank
and pull to remove tanks.
Grip the twin tank and pull
the tab on the water tank
cap to open.
Turn the twin tank over
to empty any excess
water and detergent
over the sink.
Hold the corner of the
microfibre pad down
with your foot and lift
steamer to peel away.
Rinse the detergent tank with
water and replace both caps,
pushing firmly to close before
replacing the twin tank back
onto the steamer.
The microfibre pad
is machine washable
(Max 40⁰C) allow
to fully dry before use.
Max 40°C
After cleaning, ensure
the microfibre pad
is thoroughly dried
before using with
the mop steamer again
or storing.
TIP