Vax VX36, Let'S Get Started

Page: 15 / 24

TIP
Using your machine Using your machine
CAUTION:
Always switch off the steamer before attaching/detaching the steam wand, floorhead, accessories and twin tank.
Always stand steamer securely against a wall/fixed structure. The steamer and accessories get very hot during use, always
allow them to cool down before handling. Taps should be turned off when steaming around them. Don’t steam clean ovens,
oven surfaces or grills when hot, allow to cool to room temperature first.
IMPORTANT: Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.
Press the button
on the control panel
to select preferred
setting steam/detergent.
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the trigger
continuously to prevent
over saturation.
To re-attach the handheld
to the reach wand, grip
the top of the steam wand,
remove the concentration
tool and line up handheld
with steam wand and push
down firmly until handheld
clicks into place.
To improve your
comfort, use the
additional handgrip
on the handheld
to support the unit
and help you clean
difficult to reach areas.
Attaching small accessory tools
Small accessory tools can be attached to the concentration
tool nozzle when using the reach wand or handheld.
First ensure the steam trigger is fully released, no steam
is coming out of the steamer and the concentration
nozzle has cooled down. Use the arrows to align the
accessory tool to the end of the concentration nozzle.
Twist accessory tool clockwise until locked into position
and secure. Turn anti-clockwise to remove.
After attaching your
chosen accessory tool
gently pull to make sure
it’s locked into place
TIP