4
–
HANDLING INSTRUCTIONS
4.1 PACKING LIFTING AND TRANSPORT
During all lifting or transportation make sure that
the packed machine is securely anchored to
prevent it from tipping over or falling accidentally.
Transport vehicle loading and unloading operations
must be carried out with adequate lighting
and by
trained professionals only.
The packed machine must be handled using
adequate devices, making sure not to
damage/strike any part of the packing, not to tip it
over and to be very careful when placing it on the
ground.
(
☞
) All these instructions also apply to the batter-
ies and the battery charger. *
4.4
DIMENTIONS AND WEIGHT OF THE
PACKING
4.2
CHECKS UPON DELIVERY
(
☞
) When the goods are delivered (machine,
battery or battery charger) by the transporter,
carefully check the condition of the packing and its
contents. If the contents have been damaged,
notify the transporter and reserve the right, in
writing (select the word “reserve” on the
document), to submit a claim for compensation
before accepting the goods.
4.3
UNPACKING
(
!
) Wear safety clothing appropriate to those
identified by a qualified risk assessment.
The machine is packed with in a cardboard housing
placed on a wooden crate; to unpack the machine
carry out the following steps:
-
Use scissors or clippers to cut and eliminate the
plastic straps.
-
Slip off the cardboard housing from the top of the
packed machine.
-
Remove the envelops inside and check their con-
tents (use and maintenance manual, battery
charger connector*, power cable**)
-
Remove the metallic brackets or plastic straps that
secure the machine to the pallet. You will require
an adjustable spanner or socket set to do this.
-
Take out the scrubber pad from the packaging
(the squeegee is already attached to the unit)
-
Take the machine off the pallet (pushing it back-
ward) by using an inclined surface that is solidly
attached to the floor and to the pallet.
It is recommended to keep
all the pieces of the
packing since they might be useful in the future to
protect the machine and the accessories during
transport to another location or sent for
evaluation/repair. If not, the packing can be
disposed in accordance with current disposal laws.
Volume: Weight:
Model VCSD -01
Model VCSD -02 (with battery)
Model VCSD -02 (without battery)
0,38 m³
53 kg
61kg
41.5 kg
7
* Only applies to VCSD-02 model
** Only applies to VCSD-01 model
