![background image](http://html2.mh-extra.com/html/vax/vcsd-01/vcsd-01_user-manual_3654553005.webp)
3 - SAFETY INFORMATION
3.1
BASIC RECOMMENDATIONS
(
☞
) Carefully read the “instruction manual”
before
starting,
using,
performing
unscheduled or routine maintenance or
any other work on the machine.
(
!
) Rigorously comply with all the
instructions provided in this manual and in
those for the batteries and battery chargers
(with particular attention to warnings and
danger notices).*
The manufacturer will not be held
responsible for injuries to persons or damage
to property due to non-compliance with
the aforementioned instructions.
(
☞
) Before using the machine, make sure that
each part is in the correct position.
(
!
) The machine should only be used by
personnel who have received appropriate training.
To avoid unauthorized use, keep the machine in a
place that denies access to unauthorized
personnel when not being used and remove the
key from the control panel.
(
!
) This commercial appliance can be used by
those under 16 (but not below 8) years and
persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if
they have been given instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Cleaning and user maintenance
shall not be performed without supervision.
(
!
) Do not operate this machine for any other
purpose except for the use for which it was
specifically designed. Evaluate the type of building
where it will be utilized and rigorously comply
with the current safety regulations and conditions.
(
◊
) Do not use the machine in places without
adequate lighting, in explosive environments,
when harmful dirt is present (dust, gas, etc.), on
roads or public passageways and in outdoor
environments in general.
(
!
) The machine operating temperature range is
+4°C to +35°C; when not being used, store the
machine in a dry and non-corrosive environment
within a temperature range of b 10°C and
+50°C. When using the machine under any
condition the humidity must range between 30%
and 95%.
(
◊
) Never use or vacuum liquids, gases, dry
dust, acids and solvents (e.g. paint thinners,
acetone, etc.), even if diluted, inflammables
or explosives (e.g. petrol, fuel oil, etc.); never
vacuum flaming or incandescent objects.
(
!
) Do not use the machine on slopes or
ramps steeper than 2%.
For small slopes, do not use the machine sideways,
always handle it with caution and never move back-
wards. When transporting the machine on steeper
ramps or slopes, be very careful to avoid tipping
and/or uncontrolled accelerations.
The machine can be handled on ramps and/or
steps only with the brush head and squeegee lifted
off the ground.
(
!
) Never park the machine on a slope.
(
☞
) Never leave the machine unattended with the
key in and connected; it may be left only after
having disconnected it and taken the key out and
guaranteeing against accidental movements
and, if necessary, disconnecting it from the
electrical power supply.
(
◊
) Make sure there are no other persons, and
children in particular, in the area where the machine
is being used.
(
!
) Do not use the machine to transport
persons/things or to tow objects. Do not tow the
machine.
(
☞
) Do not use the machine as a support surface
for any weight for any reason.
(
☞
) Do not block or cover any openings
(
!
) Do not remove, modify or by-pass the safety
devices.
(
!
) The appropriate Personal Protective
Equipment should be worn to operate the
machinery and protect the user. This should be
in accordance with an appropriate risk
assessment prior to its first use. Before starting
to work, remove necklaces, watches, ties and
other objects that may cause serious injuries.
(
!
) Do not insert hands between moving parts.
(
☞
) Do not use detergents that differ from those
recommended
and follow the instructions
indicated on the chemical’s relevant safety d at a
sheets. Follow
all storage, disposal and safety
instructions of each individual or group of
detergents as listed on the product.
(
!
) Make sure that the battery charger power
sockets are connected to an efficient earthing
system and that they are protected by magneto
thermal and differential circuit breakers.*
(
!
) Follow the battery manufacturer’s instructions
and comply with safety instructions and legal
provisions. The batteries should always be clean
and dry to avoid surface leakage currents.
Protect the batteries against impurities, such as
metallic dust.*
(
◊
) Do not place tools on top of the batteries: they
may cause a short-circuit or an explosion.
(
◊
)Never spray water on the machine to clean it.
(
☞
) Recovered fluids contain detergents,
disinfectants, water, as well as organic and
inorganic material collected during work
operations: dispose of them in accordance with
current legal provisions.
5
* Only applies to VCSD-02 model