7
–
OPERATING INSTRUCTIONS
17
7.5
SQUEEGEE ASSEMBLY
- Put the two fixing pins of the squeegee (Photo
23-A) inside the holes in the squeegee support
(Photo 22 - A).
- Screw the two knobs (Photo 22 - B) in order to
secure the squeegee to the support (Photo 22 -
A).
- Connect the suction hose coming from the
machine to the suction coupling pipe on the
squeegee body (Photo 23 - B).
7.6
SQUEEGEE DISASSEMBLY
- Disconnect the suction hose from the coupling
pipe on the squeegee body (Photo 23 - B).
- Unscrew the two knobs (Photo 22 - B) that secure
the squeegee to its support and push down the
squeegee to free it.
B
A
Photo 22
A)
Squeegee support
B)
Squeegee fixing knob
A
B
A
Photo 23
A)
Squeegee fixing pin
B)
Suction hose coupling pipe
7.7
SQUEEGEE BLADES DISASSEMBLY / AS-
SEMBLY
- Disassemble the squeegee from its support (see
7.5).
- Unscrew the knobs (Photo 24 - A) and remove
metal blade retainer (Photo 24 - B)
- Extract the fixing bolts (Photo 24 - C) and remove
the front metal blade retainer (Photo 25 - A);
remove the squeegee rubber blades tearing them
from a side.
- To replace the squeegee rubber blades, follow the
C
D
B
Photo 24
same procedure on the contrary starting from the
front blade; lock the fixing bolts (Photo 24 - C)
retaining them in the squared seats in the
squeegee body; then, place the rear rubber blade
(Photo 24 - D) and the metal blade retainer
(Photo 24 - B), locking them with the fixing knobs
(Photo 24 - A).
A)
Squeegee fixing knob
B)
Metal retainer for rubber blades
C)
Fixing bolts
D)
Rear rubber blade