Vaventis Fresh-r Installation Manual Download Page 3

Page: 3 / 52

Installation manual

Foreword

Installation manual for the contractor

Dear contractor,

Thank you for purchasing the fresh-r

In-The-Wall or the fresh-r everywhere

In-The-Wall

This manual is intended for professionals and contains all the necessary installation information.

To install the fresh-r

correctly and safely, it is essential that you read this information carefully

and familiarize yourself with the fresh-r

before you start. The fresh-r

requires a 240v mains

electricity supply and must be connected by a qualified electrician.

The information in this manual is important for the correct and safe installation of the fresh-r

With the table of contents you’ll be able to find the right information in the manual quickly.

This is the installation manual. Besides this manual there is also an user manual available.

NOTICE

This manual covers two fresh-r systems:

fresh-r

In-The-Wall

2. fresh-r everywhere

In-The-Wall

Some illustrations might differ from the actual model you have purchased.

Details about the fresh-r everywhere

In-The-Wall can be found in appendix 16.2.

Summary of Contents for Fresh-r




















































Search results

Summary of Contents for Fresh-r

Reviews:

Related manuals for Fresh-r

Brands by name

Popular brands

Vaventis Fresh-r, Installation Manual

Search results

Summary of Contents for Fresh-r

Reviews:

Related manuals for Fresh-r

Brands by name

Popular brands