27
5. Hold the unibody as shown in
fi g. 32
and place it in the timber frame (
fi g. 33
).
fi g. 32 Hold the unibody as shown in this fi gure
fi g. 33
Place the unibody in the wall
6. Make sure the distance between the front side of the unibody and the front face of
the inner-wall is 43 mm (see
fi g. 34
).
fi g. 34
Make sure the distance between the front side of the unibody and the front face of the
the inner-wall is 43 mm
43 mm
-0
+2
Summary of Contents for Fresh-r
