Vatech EzSensor, User & Installation Manual

Page: 45 / 58

43
Appendix
A.1 LED Indicators
The EzSensor Hardware Controller has two LED indicators that show its functional status.
The location of the LED lights is as shown in the following illustration and described in Table 3.
<Table 3. Description of LED Indicators>
Operational State
LED State Functional Status
Confirmation LED 1 LED 2
Initial State
Green Off USB Connection
Standby
Green Green Capture standby
Trigger (X-ray On)
Orange Green X-ray On and Sensor Trigger On
Data Transmission
with the USB PC interface cable
Green Orange
Confirm data transmission
with the sensor board
Image acquisition
Green Off
Completion of data transmission
(Return initial state)
LED 1
LED 2