Vatech EzSensor, User & Installation Manual

Page: 4 / 58

2
The device must be installed and used in accordance with the safety regulations and
instructions supplied in this user manual only for the purposes and applications for which it is
intended.
Indications for Use
EzSensor, an Intra-oral Imaging System, is intended to collect dental x-ray photons and
convert them into electronic impulses that may be stored, viewed, and manipulated for
diagnostic use by dentists.
Before each usage, check the outer surface of the EzSensor for any signs of physical damage
or defect. The surface of the EzSensor should have a smooth finish, with no evidence of
chipping or damage. Otherwise, contact your local VATECH product distributor for further
instructions on how to proceed.
To ensure the correct usage of the EzSensor device in a clinical environment, for which the
intended purposes correspond to its design and application, only dentists or their designated
operators are authorized to operate this system.
Modifications and/or additions to the device must be conducted exclusively by VATECH
personnel or by parties expressly authorized to do so by VATECH. Any modifications or
additions must always comply with the standards and generally recognized rules of good
workmanship.
It is the user‟s responsibility to ensure compliance with all local safety regulations in effect in the
jurisdiction of installation.
Electrical safety
The covers of the device may be removed only by qualified and authorized technical personnel.
This device can only be used in rooms or areas which comply with all laws and regulations
applicable to electrical safety on medical premises, such as CEI standards for the use of an
additional ground terminal for equipotential connections. This device must always be
disconnected from the power supply before cleaning or disinfecting.