Vatech EzSensor, User & Installation Manual

Page: 40 / 58

38
Chapter 4 Maintenance
For optimal performance, Rayence recommends that the working area be kept clean. There
are no specific cleaning requirements for the EzSensor beyond normal care and attention
for aesthetic appearances.
Caution: Federal law restricts this device to sale by or on the order of a physician.
4.1 Visual Inspection
Like all electrical systems, EzSensor requires not only correct usage, but also visual inspection
prior to operation, as well as routine checks at regular intervals. These precautions will help
ensure that the system operates accurately, safely, and efficiently.
Before use, the operator should check the system for any signs of physical damage or defect. If
something out of order is suspected, contact your local VATECH product distributor for further
instructions on how to proceed.
4.2 Periodic Maintenance
Periodic maintenance should be performed as necessary, and at least once a month.
Maintenance should consist of various checks performed by the operator or by a qualified
service technician.
●
Check that all cables connected to the EzSensor are undamaged.
●
Check for external damage to the EzSensor that may compromise its ability to be safely
operated. If EzSensor is defective, the sensor will be returned to the manufacturer for repair.
●
Arrange the sensor and control box USB cable to prevent the damage of the
cable‟s
rubber tube. For example, do not press the cable under the legs of the table or the people.
4.3 Care and Cleaning
Wipe the front plate of the sensor unit with ethanol or glutaraldehyde solution to disinfect it each
time a different patient uses the instrument, in order to prevent infection. If you are using
disinfectant other than those specified above, or you are mixing another disinfectant with
ethanol, please also consult a specialist, because they may harm the front plate.