Vatech EzSensor, Installation & User Manual

Page: 8 / 50

1. Introduction
1.2. System Components
The EzSensor device installer should check the following items listed in the table below before system
installation. If the serial numbers of the individual parts do not match, do not install the system and contact
your local distributor or agent for support.
< Table 2. EzSensor Cable Connections >
No
1.
2.
Sensor Module
Control Box
Components Remark
3.
4.
5.
6.
7.
8.
USB Cable (3M)
Holder for Control box
Holder for Sensor
EasyDent V4 Installation CD
Driver Installation CD
EzSensor Manual USB 2.0 (Mandatory)
Document
1. Sensor Module
Consists of a special CMOS sensor specifically designed for use in radiography and enclosed in a
hermetically sealed ergonomic capsule. The sensitive surface of the sensor is covered with a thin
layer of scintillating phosphorous through which X-ray radiation is converted into light and then into
an electric charge.
7