Vatech EzSensor, Installation & User Manual

Page: 36 / 50

4. Maintenance
4. Maintenance
4.1. Visual Inspection
Like all electrical systems, EzSensor requires not only correct usage, but also visual inspection prior to
operation, Along with routine checks at regular intervals. These precautions will help ensure that the system
operates accurately, safely, and efficiently.
Before using, the operator should check the system for any signs of physical damage or defect. If
something is detected, contact your local distributor of VATECH & E-WOO products for further instructions
on what to do.
4.2. Periodic Maintenance
Periodic maintenance should be performed if needed, but at least once a month. It must consist of various
checks performed by the operator or by a qualified service technician.
● Check that all cables connected to the EzSensor are undamaged
● Check for external damage to the EzSensor that could compromise its ability to operate safely.
4.3. Cleaning
To clean the EzSensor, use either of the following solutions listed below and observe the noted precautions.
● Mild soap and water
● Isopropyl alcohol (70%)
Do not soak or immerse the system and be sure to dry it completely afterwards.
Clean the surface of the system by moistening it with a soft cotton swab dipped in either of the cleaning
solutions listed above. Gently wipe the surface from end-to-end in lines without applying pressure. Make
sure that the liquid will not penetrate the system through the USB cable or the sensor cable connectors.
After cleaning the surface of the EzSensor, use a clean lint-free cloth to dry the system, as needed, until the
surface is clean.
35