Vatech EzSensor, Installation & User Manual, Page: 3 / 50

Safety Procedures
The device must be installed and used in accordance with the safety regulations and instructions supplied
in this user manual for the purposes and applications which it is intended for.
Before each usage, check the outer surface of the EzSensor for any signs of physical damage or defect.
The surface of the EzSensor should have a smooth finish, with no evidence of chipping or damage.Otherwise,
contact your local distributor of VATECH & E-WOO products for further instructions on what to do.
To ensure correct usage of the EzSensor device in a clinical environment, for which intended purposes
correspond to its design and application, only dentists or their designated operators are authorized to
operate this system.
Modifications and/or additions to the device must be done exclusively by VATECH & E-WOO personnel or
by parties expressly authorized for the purpose by VATECH & E-WOO. Any modifications or additions must
always comply with the standards and generally recognized rules of good workmanship.
It is the user’s responsibility to ensure compliance with all local safety regulations in effect in the
state/country of installation.
Electrical safety
The covers of the device may be removed only by qualified and authori z ed technical personnel.
This device can only be used in rooms or areas which comply with all laws and regulations applicable to
electrical safety in the medical premises, such as CEI standards for the use of an additional ground terminal
for equipotential connections. This device must always be disconnected from the power supply before
cleaning or disinfecting.
Water and other liquids must not be permitted to penetrate inside the device, where they could cause short
circuit or corrosion. No protection is supplied against liquid penetration.
Explosion safety
This device is not recommended to be used in the presence of flammable gases or vapours. Some
disinfectants evaporate and form explosive or flammable mixtures. If disinfectants of this kind are used, it is
important to let the vapours disperse before using the device again.
For improvement of product performance, supplementation, or follow-up of information; the contents of this
manual are subject to change without separate prior notice.
2