OPERATION AND MAINTENANCE MANUAL
MAC-HS MOTORS
PAGE: 57
CODE: CTT32 EDITION: 04 RELEASE: SEPTEMBER 2020
Subject to technical changes without prior notice
6.3
Replacing the encoder
The procedure for replacing the encoder must be carried out as follows, depending on the type:
6.3.1
Solid shaft encoder
1.
Remove the protection (a)
2.
Loosen the elastic coupling (b) that connects the shafts
3.
Remove the stator flange (c)
4.
Remove the encoder (d) from the flange
Figure 22: Replacing the encoder on MAC-HS motors (solid shaft type)
Summary of Contents for MAC-HS 100
Page 1: ...OPERATION AND MAINTENANCE MANUAL MAC HS MOTORS...
Page 64: ...P CTT 32 ED 04...
