OPERATION AND MAINTENANCE MANUAL
MAC-HS MOTORS
PAGE: 34
CODE: CTT32 EDITION: 04 RELEASE: SEPTEMBER 2020
Subject to technical changes without prior notice
3.8.4
Provision for accelerometer assembly
As an option and according to the customer's specifications, motors in the MAC-HS series can be adapted for accelerometer
assembly. This type of sensor provides information about the vibrations in the motor. Accelerometers can be fitted at different
places on the motor according to each customer's requirements. The following figure shows one possible setup:
Figure 8: Accelerometer provision
3.8.5
Noise level
The technical data sheets VASCAT provides for each motor show the noise level in dB issued by each model.
Optionally, motors can be fitted with a kit to reduce the level of noise emissions. Please check with VASCAT for more details.
The machines directive specifies a noise level of 80 dB at work posts. The user is responsible for guaranteeing said level using
the installation of external absorption devices if necessary.
Tapped holes for
accelerometers
Summary of Contents for MAC-HS 100
Page 1: ...OPERATION AND MAINTENANCE MANUAL MAC HS MOTORS...
Page 64: ...P CTT 32 ED 04...
