Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 33-10944
Page # 5
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all
parts, then go back and fully tighten all bolts, this will make it easier
during assembly of unit
.
1.
Unpack the unit and confirm that you have all the hardware and
required parts listed.
Note: Please decide which configuration you would like to use before
starting to assemble the unit. Once you decide you can continue with
steps #2 through #9, or skip any of the steps you don’t need, according
to your option.
Option #1a
Long Spine (Steps #10 & 11) Swinging Mount:
DLX Plasma Bracket
Option #1b
Long Spine (Steps #12 to 18) Swinging Mount:
Mounting Frame
Option #2
Short Spine (Steps #19)
Console
Option #3
Short Spine (Steps #20 to 28) Wall Mount
2.
Locate the Spine (part D) or Short Spine (part D1) and set back face
down on a scratch free surface, then place the Frames (part A, B & C)
on it, make sure the holes of the bracket aligned with the threaded
inserts of the Spine and the top surface of Frames are flush with the
grooves of Spine. Then assemble the Shelf Frames to Spine with the
5/8” Bolts (part 2). See detail #1.
Parts Required
Tools Required
A - Top Frame
(1)
Allen Wrench
B - Shelf Frame
(1)
C - Bottom Frame
(1)
D – Long Spine or D1 - Short Spine
(1)
2 - 5/8” Bolt
(12)
