Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 33-10944
Page # 16
Option #3:
WALL MOUNT w/MOUNTING FRAME
20. In case you want to hang your Plasma TV on the wall, you
can follow these steps.
21. The Mounting Frame must be mounted to two Wood Studs at
least 12” apart, using a high quality stud sensor locate two
adjacent studs, verify with a nail if correct.
22. Pre-drill a 2 1/2" deep hole at the desired height in each stud
using a 3/16” drill bit, make sure that the holes are center
area of the studs and level with each other. Use the Mounting
Frame (part J) as a template to mark the location of the
second hole in each stud and drill another set of holes 2 1/2"
deep with the 3/16” drill bit in the marked location.
23. Now attach the Mounting Frame to the Wall using four Lag
Bolts (part 10) through the Lag Bolt Washer (part 11) through
the Mounting Frame into the holes in the wall. Make sure the
Bracket is oriented so the flat surface of the “U” plate is
against the wall and that a set of Lag Bolts is on each side of
the center rail as shown in detail #14.
Parts Required
J – Mounting Frame
(1)
10 – Lag Bolt (4)
11 – Lag Bolt Washer
(4)
Tools Required
Stud Sensor, Mallet, Power Drill, 3/16” Drill Bit and Open Wrench
