If you are having trouble feeding the filament into the
hotend, pull the filament out and trim the tip of the
filament with a pair of scissors.
Extend the filament guide tube
from the retracted position.
1
Remove the filament spool from
the packaging and place it on
the spool holder.
2
Take the end of the filament
from the spool and insert it
into the guide tube.
3
5
PAGE 9
Filament Installation
4
Thread the filament through the guide tube and insert it into
the extruder. You’ll need to push down on the tensioner button
to open up a gap.
Once the filament is inserted all the way down into the hotend,
insert the guide tube into the top of the extruder cap.
