Speed
This sets the printing speed of the printer. Recommended speed range is 50-70 mm/s for best
printing quality.
PAGE 24
Slicing Settings Explained
Temperature
This sets the temperature to which the hotend heats up to. For Trifecta 1.75 PLA filament, set
the hotend temperature to 215-220 degrees Celsius.
Brim
Turning on the Brim printing feature in the settings menu will add a one layer brim to the edges
of your printed model . This is useful for countering the lifting effect on the corner of your prints
and will also provide better adhesion to the print surface. Brim can also be added to support
structures for more stability.
