Transportation, installation and connection
Operating instructions
VarioShaker 270 with control box
Page 25 of 62
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
4.1.1
Dimensions of the system base plate
The VarioShaker must be installed on a plate with a weight of at least 25 kg.
Otherwise the performance of the VarioShaker is limited.
In the event that two devices are installed close to each other, you must ensure
that the assembly plates have the specified weight. A so-called vibration
decoupling must be used.
This decoupling must also be used if vibrations are expected through combined
machines in the application or the combined machines may not be exposed to any
vibrations.
A
tip / note
from the manufacturer
We recommend non-tear damping elements (metal-rubber buffer) that can
compensate for movements in the X-Y-Z directions.
The damping elements used must be approved respectively for a mass of > 30kg.
▪
Metal-rubber buffer MGA diameter 25mm or
▪
Metal-rubber buffer MGA diameter 20mm
4.1.2
Drill image for assembly
Figure 4.1:
Set-up and fasten
1
2
Summary of Contents for VA-Art-00018
Page 2: ......
