Operation and usage
Operating instructions
VarioShaker 270 with control box
Page 43 of 62
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
6.4.3
Introduction to the creation of CLIPS
A movement on the VarioShaker is generated through the correct combination of
frequency, amplitude and phase.
The PRESETS help to easily and quickly understand dependencies.
Load STIR IT UP.
The frequency and amplitude must be initially present so that an effect is created
when PLAY is pressed.
Areas between 15 and 30 Hz are a good range, for example, for the STIR IT UP
movement.
Once the excitation frequency has been found, the amplitude can be adjusted to
the best effect.
After this, the clip should be saved under MY CLIPS, for example, with a machine
identification.
Figure 6.8:
CLIP EDITOR (green) - Introduction to the creation of CLIPS
Summary of Contents for VA-Art-00018
Page 2: ......
