Operation and usage
Operating instructions
Page 36 of 62
VarioShaker 270 with control box
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
Center parts between sides b and d
Setting the frequency and adjusting the amplitude to
your case
Center parts between the sides a and c
Setting the frequency and adjusting the amplitude to
your case
Move parts to side a, b, c or d
Setting the frequency and adjusting the amplitude to
your case
Completely rearrange parts through complete jump
movement
Setting the frequency and adjusting the amplitude to
your case
Set all amplitudes to zero
Serves as a break in the sequence to let vibrations
come to an end or to create transitions
All corners on a block
Causes a very quick stop of the vibration.
! ATTENTION! Pay attention to switch on duration
Table 6.1:
PRESET CLIPS
By pressing a PRESET clip, it will be accepted in the CLIP EDITOR.
This can be adjusted to the respective conditions there and then saved as MY
CLIP.
The presettings of the PRESET CLIP make it easier for you to find the right
settings. Phases like amplitude are preset.
Normally only the frequency has to be adjusted. This allows the amplitude to be
perfectly optimized as well.
Summary of Contents for VA-Art-00018
Page 2: ......
