Transportation, installation and connection
Operating instructions
Page 28 of 62
VarioShaker 270 with control box
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
4.2 Changing the vibration plate
It is possible to replace the vibration plate (A) for different applications and
workpiece.
Figure 4.3:
Changing the vibration plate
Use a hook key (B) or alternatively a fitting Allen wrench for this.
1)
Place the tool in the designated drill holes of the vibration plate.
2)
Pull the vibration plate up.
A
tip / note
from the manufacturer
The vibration plate is held in place with magnets; if necessary, you must pull them
with a little tug or tip/lever it to break through the holding resistance.
3)
Remove the vibration plate and insert the new vibration plate.
4)
Make sure that the vibration plate is attracted by all magnets. You can confirm
this by trying to move the vibration plate by hand:
✓
If the vibration plate moves, then it is not correctly positioned and will not be
held by all magnets.
✓
If the vibration plate does not move, then it is correctly positioned and will be
held by all magnets.
B
A
1
2
Summary of Contents for VA-Art-00018
Page 2: ......
