background image

9

REMIX

REMIX

REMIX

REMIX

REMIX

REMIX

5

6

7

8

9

10

REMIX

REMIX

REMIX

REMIX

REMIX

REMIX

The bowl screen has been opened while the mixer was running.
The bowl can be lowered. 
When the bowl screen is closed and the operator presses 

 

twice, the mixer starts at its lowest speed.

As figure 6, but automatic lowering of the bowl is selected by 

pressing 

.

 

The mixer is running - green diode in the field 

 is constantly 

alight when the chosen speed has been reached. 

The operation time can be changed by activating the fields 

 

and 

. The mixer can be paused by pressing 

.

 

The mixer can be stopped by activating the field 

.

 

By activating the field 

 the bowl is automatically lowered when 

the mixer stops.

The field 

 has been activated and the mixer is ready.

The time can be changed by activating the fields 

 or 

.

The bowl can be lowered by activating the field 

.

The mixer can be started by activating the field 

.

The mixer runs and an operation time has been indicated.
Automatic lowering of bowl at ended operation time has been 

chosen - see 

position 6

.

When activating the field 

 or 

 automatic lowering of bowl is 

deactivated and can not be chosen again.

The mixer is ready to run by activating the field 

.

Speed 2 is chosen.

An operation time has been chosen by activating the field 

The bowl can be lowered by pressing 

.

Summary of Contents for ERGO60

























Reviews: