background image

2

Caution    -READ BEFORE OPERATING-   Caution

Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on 

the use, cleaning and lubrication of the mixer.

This manual should be seen as an integral part of the mixer and should be kept by the machine 

throughout its working life.

Varimixer recommends that the following precautions be adopted to help make the mixer operation 

safer and more efficient.

- All operators should be at least 18 years of age.

- All operators should be thoroughly trained before being allowed to operate the mixer. 

- NEVER reach into the bowl when the mixer is running.

- Do not wear loose clothing or rings while operating the mixer.

- Stop the mixer and lower the bowl before adding ingredients, scraping the bowl, removing the 

agitator, or removing the product.

- Stop the mixer before removing or installing attachments into the drive hub.

- Do not attempt to assemble or disassemble attachments while mounted into the drive hub.

- Always use the pusher plate with the slicer/meat grinder attachments.

- NEVER bypass the safety mechanisms supplied on the mixer. Doing so can cause injury and

.

is 

the responsibility of the user to insure these safety mechanisms are operating properly.

Before the machine is commissioned, it is important to read these instructions thoroughly.

The manufacturer may update the product manual without updating this copy of the manual

Summary of Contents for ERGO60

























Reviews: