background image

8

1

2

3

4

REMIX

REMIX

REMIX

REMIX

Vl4 

Control

 

Panel

 - 

SurVey

 

of

 

VarIouS

 

oPeratInG

 

SItuatIonS

:

The following pictures show various operating situations and corresponding explanation:

If the field 

 is activated 

while the mixer is running, the 

chosen operation time is reset 

and the speed is set to mini-

mum. (The same when push-

ing emergency stop).

Activation of the field 

 

keeps the chosen values for 

operation time and speed.

The operation time and the 

speed can be changed while 

the mixer is running.

The operation time can be set 

to 90 min. as maximum.

Emergency stop

Bowl up

Bowl down

Pause

Time up

Text  field

Time down

Fixed speeds

Speed indicator

Speed down

Speed up

Start/Stop

REMIX

There is power connection to the mixer and the bowl is not in its top 

position. The bowl can be raised by activating the fields 

 

and 

 simultaneously - diodes in the fields are flashing! 

 

The mixer cannot be started until after the bowl has been raised to 

its top position.

The bowl can be lowered by activating the field 

.

The bowl is in its top position and the mixer is ready for ope ration 

by activation of the field 

.

Speed can be chosen. Operation time can be chosen by activating 

the fields 

 or 

.

The bowl can be lowered by activating the field 

The mixer is ready for operation by activating the field 

The bowl can be lowered by activating the field 

.

One of the four fixed speeds is chosen by a short activation of the 

field 

 - six diodes on the speed indicator are flashing.

There is no power connection to the mixer or the emergency stop 

has been activated - there is no light in the control panel.

Summary of Contents for ERGO60

























Reviews: