Varian Micro-GC 490-GC, User Manual

Page: 82 / 83

Reference
Page 74 User Manual Micro-GC Varian, Inc.
Error
Class
©) Error
number
(NNN)
Event/Error code Description Action needed
0 29 GC module changed
Changing a channel (controller or module) and
restarting the instrument
NA
0 30 TCD Gain calibrated End TCD Gain calibration NA
0 31 TCD Offset calibrated End of Offset calibration NA
0 32 Null String Not used NA
0 33 ADC reading out of range Analog Digital Control out of range NA
0 34 EDS Analytical Module incorrect
Electronic Data Sheet Analytical Module
incorrect
NA
0 35 EDS Config checksum incorrect
Electronic Data Sheet Configuration checksum
incorrect
NA
0 36
EDS Logbook checksum
incorrect Electronic Data Sheet Logbook checksum
incorrect
NA
0 37
EDS Protected checksum
incorrect Electronic Data Sheet Protected checksum
incorrect.
NA
0 38
EDS C.C. Config checksum
incorrect Electronic Data Sheet Channel Control
checksum incorrect.
NA
0 39
EDS C.C. Logbook checksum
incorrect Electronic Data Sheet Channel Control Logbook
checksum incorrect
NA
0 40
EDS C.C. Protected checksum
incorrect Electronic Data Sheet Channel Control
Protected checksum incorrect
NA
0 41
EDS A.M. Config. checksum
incorrect Electronic Data Sheet Analytical Module
Configuration checksum incorrect
NA
0 42
EDS A.M. Logbook checksum
incorrect Electronic Data Sheet Analytical Module
Logbook checksum incorrect
NA
0 43
EDS A.M. Protected checksum
incorrect Electronic Data Sheet Analytical Module
Protected checksum incorrect
NA
0 44 EDS Config SVER incorrect
Electronic Data Sheet Configuration Structure
Version incorrect
NA
0 45 EDS Protected SVER incorrect
Electronic Data Sheet Protected Structure
Version incorrect
NA
0 46
EDS C.C. Config SVER
incorrect Electronic Data Sheet Channel Control Structure
Version incorrect
NA
0 47
EDS C.C. Protected SVER
incorrect Electronic Data Sheet Channel Control
Protected Structure Version incorrect
NA
0 48
EDS A.M. Config SVER
incorrect Electronic Data Sheet Analytical Module
Configuration incorrect
NA
0 49
EDS A.M. Protected SVER
incorrect Electronic Data Sheet Analytical Module
Protected Structure Version incorrect
NA
0 50
Pressure Offset calibration
complete Notification Pressure Offset calibration is
completed
NA
0 51
Pressure Offset calibration
Failed
Calibration offset out of range
0 52 Unable to store pressure offset Pressure off set is out of valid range (range??)
2 53
Temperature sensor
disconnected
Temperature sensor not connect to instrument Call Service
1 54 Not ready to start run
Issued by Safety Control Object in Hardware
domain. Bridge Call to GC domain (Reporting
Not Ready To Start Run Error)
Check Method
1 54 Stream selection failed Stream selector (VICI) failed switching Check Valve
1 55
Ambient pressure or
temperature alarm
Issued by Safety Control Object in Hardware
domain whenever ambient temperature has
passed a certain value.
1 56 Column cleaning Instrument in column cleaning state NA
1 57 Equilibrating temperature zones
Instrument stabilizing after column cleaning
Wait till Ready
60
DMD control to temperature
setpoint
Notification that DMD is warming up.
Wait for
completion