Vari RBS-700D, Operating Instructions Manual

Page: 24 / 56

RBS-700D
Set the maximum engine speed, let the working tool spin at maximum speed, and then drive against the growth that you want to mow.
The vegetation is removed to the right of the machine.
If the cut growth is very dense, prickly, rotten or beaten, it is necessary to reduce the machine’s working width proportionally in such a
way that there is no significant reduction in working tool speed and thus reduced mowing quality.

The un-mown vegetation must always be on the left side of the machine.

Dense and tall vegetation may lift the machine.

Find more information on Modern mowing of tall grass , correct use of drum mowers and other useful tips on our
web pages in the section TIPS FOR THE GARDEN .
2.4.3.5 The Machine Working Width

It is always necessary to adjust the working width of the machine to the vegetation density!
We don't recommend to use the maximal working width ( Table 11 ). The operator cannot lead the machine in the terrain sufficiently
straight and accurately to cut the vegetation across the full width. We recommend to drive the machine partially (app. 5-10 cm from the
working space cover edge) in the vegetation (shown in
Fig. 7 on page 49 ).

by observing this instruction you will prevent un-mown strips on the maintained surface.
2.4.3.6 Mowing Troubles

Pay special caution when lifting and backing the machine!

Only tilt the machine back on the handlebar. Always pay extra caution when moving in the area under the raised
machine! Secure it against spontaneous movement!

When cleaning the working space, the engine must always be switched off!

Take extra care when cleaning the space underneath the top cover. Blade cutting edges are sharp. When
cleaning, protect your hands with work gloves or use a suitable item, such as a tree branch.

Always wait for the working tool to stop before proceeding with any activity on or around the machine.
1) The engine looses speed, but doesn't choke.

Immediately stop the machine travel and slightly back-up with the machine front gently lifted (pushing the handlebar
downwards). The working space will partially clean itself from excessive material. Then move again against the growth.
2) The working tool stopped, the engine choked.

Release both control levers on the handlebars and lift the front of the machine. Start the engine and move the machine
slightly to the back. Switch the engine off and clean the area under the plastic cover and spread the grass mass on the
surface. Start the engine, turn on the working tool drive, and start moving against the growth.
2.5 Maintenance, Care, Storage

Owing to the weight of the machine, all maintenance and adjustment should be performed by two people.
To secure a long-term satisfaction with our product, it is necessary to provide it with due care and maintenance. By providing regular
maintenance you will reduce its wear and you will secure correct operation of all its parts.
Observe all instructions concerning maintenance and adjusting intervals. We recommend that you keep records of operating hours and the
conditions under which the machine is used (these may be useful for servicing centres). We recommend that you have the post-season
maintenance implemented by one of our authorized service centres; the same applies to standard maintenance if you are not certain of
your technical capabilities.

The good help to monitor operating hours is the VARI PowerMeter device. This accessories can be bought with every
dealer of VARI products.

Prior to each use of the device, check the tightening of the bolts fastening the attachment, its work tool and all
screwed connections of guards, covers and the motor!

Replace the lost screwed connections with the original parts that are designed for the given spot. By using
unoriginal low-quality parts, you expose yourself to the risk of injury or damage to the machine!
2.5.1 Recommended Tools and Accessories
For assembling and maintenance of the machine, we recommend the below stated accessories and tools 40 - Fig. 13 on page 52 .
40
It is not included in the product supply; it is necessary to buy it separately.
24
re
vi
ze
0
2/
20
18