Vari Hurricane MaX F-580, User Manual

Page: 23 / 64

Hurricane MaX

If you see this symbol in the operating instructions, carefully read the statement following after it,
please!

This international safety symbol indicates important instructions concerning safety. When you see this
symbol, be cautious. There is a danger of accident to you or other individuals. Carefully read through the
following information.
Table 12: Symbols
2.2 O
PERATIONAL
S
AFETY
The machine is designed to protect the operator as much as possible against any flying pieces of mowed growth. Do not remove any
passive or active security features. You would expose yourself to the risk of injury.
2.2.1 S
AFETY
R
EGULATIONS

The machine operator must be over 18 years of age. He is obliged to familiarize himself/herself with the instructions for the
use of the machine and to be familiar with the general principles of occupational safety.

During your work, use work aids approved according to ČSN EN 166 or ČSN EN 1731 (close-fitting clothes, sturdy shoes, work
gloves, and safety glasses). Keep a safe distance from the machine secured by the position of the handlebar.

When working with the machine, all other people ( especially children ) and animals must stay outside the machine's work
area. The operator may only continue working after they reach a safe 52 distance.

Always make sure that no part (especially the working mechanism or its cover) is damaged or loose before using the
machine . Identified defects must be immediately eliminated . Use only original spare parts during repairs.

Cut growth must be free of solid items (such as stones, wires, loose debris, etc.) before using the machine. These items could be
thrown out or could damage the machine. If they cannot be removed, avoid such spots.

Do not start the engine in confined spaces! Take extra care when handling the machine. When the engine is turned off, the
exhaust silencer remains hot. When filling the fuel make sure that no leak occurs and you do not spill the fuel over any engine
parts. Otherwise, dry the affected parts or wait until the petrol evaporates.

The machine is fitted with its rotating working tool. The maximum tip speed is 54 m.s -1 . Make sure that other people stay at a
safe distance when you are working with your machine (the possibility of flying off the chopped or ejected solid items)!

The machine’s safe 53 slope accessibility is 10°. The maximum engine tilt is shown in
Table 12
.

Do not let the engine running at its full speed or idling for a long time when the attached work tool drive clutch and travel
wheels drive clutch are OFF! The machine’s drive train parts (V-belt, belt pulley, coupling pulley, etc.) may get damaged!

Always switch off the engine and wait for the working tool to stop before you perform any activity in the machine's close vicinity!
Always switch OFF the engine before leaving the machine!

It is forbidden to remove any protective devices and covers from the machines.

Any repairs, adjustments, lubrication, and cleaning of the machine must be carried out when the machine is turned off, its spark
plug connector is disconnected, and its battery is removed
54 from its holder.

Due to exceeding the recommended noise and vibration values, follow these instructions when working with the machine:

Protect your hearing using suitable protection aids according to ČSN EN 352-1 (earmuffs) or ČSN EN 352-2
(earplugs). Request these aids from you seller.

After the maximum of 20 minutes of work with your machine, take a break for at least 10 minutes. During these breaks,
the respective operator must not be exposed to any other source of noise or vibrations.
52 The ČSN EN 12733 and EN 12733 standards provide for the designation of the outer security zone A around the work area B. It is necessary to prevent access to this area by
means of appropriate banning signs. The distance between the sides of areas A and B must not be less than 50 m. Once a person or animal enters this hazardous area of the
machine, the operator must immediately release the machine’s gear lever and wait with any other work until the area is free again.
53
Do not use your machine on wet grass. You must always move on safe terrain. While working, always walk. Do not ever run. Be especially careful when changing your direction on
the slopes. Do not stand on heavily sloping slopes. Do not hold your machine if you fall down - release it!
54
Only for F-580BiS .
23
Re
vi
ze
1
0/
20
19