Vari Lite VLX3, User Manual

Page: 83 / 98

M
ENU
S
YSTEM
: M
ENU
F
UNCTIONS
4
02.9703.0001 A 17 December 2012 67
ON On Indefinitely Sets Menu Display to stay on until programmed otherwise ( Display ) or turns
on a function.
Pan Pan Specifies pan function for manual control ( Manual ) or testing ( Test ).
Pan/Tilt Pan/Tilt Accesses pan and tilt options for focus swap function, movement enable/dis-
able, manual control and testing.
PASS Test Pass Indicates that a test has passed.
Programming Luminaire soft-
ware program-
ming
The luminaire is in the process of being reprogrammed with a new version of
software.
Power Level Fixture operational
power level
Sets the output of the luminaire to Normal , Quiet (reduced fan operation and
light output), Constant Fans (fans stay at a constant speed, cooling capacity),
or Level (set operational level as desired by user)
Quiet Fixture Mode Luminaire setup is in Quiet mode. LED output levels are decreased to keep
LED junction temperatures lower and fan noise to a minimum. Fans will still
vary in speed, but will not exceed the set (lower noise) limit.
Re-Calibrate Recalibrate Recalibrates luminaire.
Red Red LED Specifies Red (intensity) for manual control ( Manual ).
Reset Def Reset Defaults Resets default system configuration values.
RS232 Log RS232 Logging
WARNING: For factory use only - DO NOT use OR select, "RS232
Log - > On" unless instructed by Vari-Lite technical support to do so.
RUN TEST Run Test Indicates that a mechanism test is in progress.
SENS TST Sensor Test Indicates that a system sensor test is in progress.
Square Law Dimming Curve -
Square Law
Sets dimmer operation to Square Law dimming curve. See also, "Linear"
Start LED CAL Factory Use Only
WARNING: For factory use only - DO NOT use OR select, "Start
LED Cal".
Status Status/Error Allows scrolling through error list or displays OK if no errors.
Strobe Manual strobe
operation
Allows ( Manual ) operation of luminaire strobe.
Swap Swap Swaps pan/tilt action for special focus requirements.
Test Test Accesses diagnostic tests for internal mechanisms or assemblies.
Tilt Tilt Specifies tilt function for manual control ( Manual ) or testing ( Test ).
Version Version Displays current software version date and time (in two pages).
Wireless Wireless DMX
Receiver Attached
Allows use of optional wireless DMX receivers. Note, wireless DMX receivers
sold separately.
White White LED Specifies White (intensity) parameter for manual control ( Manual ) or testing
( Test ).
Zoom Mode Zoom Operational
Modes
Sets Zoom Mode to Matching when installing in older VLX3 Wash Luminaires
that will operate with old-style MCBs.
Table 4-2: Menu Function Definitions (Continued)
Display Definition Purpose