Vari Lite VLX3, User Manual

Page: 86 / 98

VARI
❋
LITE - VLX3 W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
70 17 December 2012 02.9703.0001 A
Troubleshooting
Error Messages
If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu
Display cycles through any applicable error message(s) until the end of the list is reached. To review
the error messages again, re-access them using the
Status function.
To access error messages:
Step 1. As indicated in Figure A-1 , press [ESC] to access the main menu screen.
Step 2. Press [Up] / [Down] arrows until Fixture appears. Press [Enter].
Step 3. Press [Up] / [Down] arrows to access Status . Press [Enter]. (Display will now scroll
through any error messages or display OK if no errors.)
Step 4. If an error occurs, recalibrate fixture. If error message persists, then contact an Authorized
VARI
❋
LITE Dealer or Service Center for support.
Note: Refer to “Error Message Reference Chart” on page 71 for Errors Message and possible causes.
Figure A-1: VLX Wash LCD Display (Menu)
ENTER
ESC
POWER
RX
TX
ERROR
FIXTURE
Enter Button
Arrow Keys
Escape (ESC)
(Left/Right/Up/Down)