M
AINTENANCE
:
2
0 2 . 9 6 8 5 . 0 0 1 0 0
17 -Ju ly- 200 6
55
DMX PCB Assembly Replacement
Parts:
24.9663.1895
1 EA
ASSY, DMX INPUT PCB
Tools:
•
#2 Phillips Screwdriver
WARNING:
Remove power from luminaire before performing maintenance.
To remove and replace DMX PCB assembly:
Step
1. Remove power from luminaire.
Step
2. Position light to access top of pan tube assembly.
Step
3. As shown in
Figure 38
, at pan tube cover, remove six 8-32x1/2" PFB screws.
Step
4. Remove pan tube cover. (Note, tether will still hold cover).
Figure 38: DMX PCB Assembly Replacement
Step
5. Disconnect wiring from DMX PCB Assembly.
Step
6. Remove four #4x3/8" H/L PN BLK ZN screws at front of DMX PCB Assembly.
Step
7. Replace DMX PCB Assembly by performing Steps 3 through 6 in reverse.
DMX PCB
Some components not
NOTE:
Pan Tube Cover
8-32x1/2" PFB
Cover Tether
Pan Tube Assembly
shown for clarity. This
#4x3/8" HLN PN
BLK ZN Screws (x4)
Screws (x6)
procedure is applicable
for all models.
VL500 80V
Pan Tube Assembly
Assembly
Do not remove this screw
Summary of Contents for VL500 Wash Luminaires
