Vari Lite VL500 Wash Luminaires, Service Manual

Page: 86 / 206

VARI
❋
LITE ® - VL500™ L
UMINAIRE
S
ERVICE
M
ANUAL
5 4 17 -Ju ly- 200 6 0 2 . 9 6 8 5 . 0 0 1 0 0
Mini-XLR (Display/Remote Programming) Con-
nector Replacement
Parts:
25.9685.0770 1 EA CONNECTOR, MINI-XLR (DISPLAY / REMOTE
PROGRAMMING)
Tools:
• #2 Phillips Screwdriver
WARNING:
Remove power from luminaire before performing maintenance.
To remove and replace Mini-XLR connector:
Step 1. Remove power from luminaire.
Step 2. Position light to access top of pan tube assembly.
Step 3. As shown in
Figure 37
, at pan tube cover, remove six 8-32x1/2" PFB screws.
Step 4. Remove pan tube cover. (Note, tether will still hold cover).
Figure 37: Mini-XLR (Display/Remote Programming) Connector Replacement
Step 5. Disconnect wiring from Mini-XLR.
Step 6. Remove two 4-40x1/4" PFB screws at front of Mini-XLR connector.
Step 7. Replace Mini-XLR by performing Steps 3 through 6 in reverse.
Mini-XLR
Some components not
NOTE: Pan Tube Cover
8-32x1/2" PFB
Cover Tether
Pan Tube Assembly
shown for clarity. This
4-40x1/4" PFB
Screws (x2)
Screws (x6)
procedure is applicable
for all models.
VL500 80V
Pan Tube Assembly
Connector
Do not remove this screw