![background image](http://html1.mh-extra.com/html/vari-lite/vl2402/vl2402_user-manual_3515479082.webp)
VARI
❋
LITE® - VL2402™ W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
6 4
17 - Se pt - 01
0 2 . 9 6 7 1 . 0 0 0 1 C
P/T
Pan/Tilt
Accesses pan and tilt options for DMX function, system configuration, and
testing.
Pan
Pan
Specifies pan function for manual control (
Man
) or pan encoder for testing (
Test
).
PASS
Test Pass
Indicates that sensor test has passed.
PCue
Play Cue
Accesses cue list for play back of cues by number.
POWR
Lamp Power
Accesses function to turn lamp on or off.
PROG
Programming
Currently programming the new version of software.
PSEQ
Play Sequence
Plays back cue sequence. Press [Enter] to start and [Menu] to stop.
RCAL
Recalibrate
Currently executing Calibration.
RDef
Reset Default
Resets default system configuration values.
RHrs
Reset Lamp Info
Resets lamp hour and lamp strike counters. For use when new lamp is installed.
RTST
Run-Test
Indicates that a system mechanism test is in progress.
SAVE
Save
Saving cue data.
ScXX
Sequence Data
Sequence playing cue number, where XX defines cue number.
Sens
Sensors
Accesses sensor choices for diagnostic testing.
SEQ
Sequence Playback
Sets sequence playback mode to Individual (plays cues from each luminaire) or
Master (all luminaires play same cue).
SNAP
Snap
Enables, disables the colors (Blue, Amber, or Magenta) taking the shortest
distance from one color to the next.
STAT
Status/Error Display Allows scrolling through error list or displays
OK
if no errors.
Stor
Store Cue
Stores cue by number. Cue number stored is dependent on next cue ID in cue
list since this field is not editable.
Strb
Strobe
Specifies strobe function for manual control.
Strk
Strike
Displays total number of lamp strikes.
STST
Sensor Test
Indicates that a system sensor test is in progress.
SWAP
Swap
Swaps pan and tilt functions for special focus requirements such as moving
mirror mechanisms.
Test
System Tests
Accesses diagnostic tests for internal mechanisms.
Tilt
Tilt
Specifies tilt function for manual control (
Man
) or tilt encoder for testing (
Test
).
Time
Timing Data
Allows manual setting of timing values for dimmer/intensity, focus, color, and
beam.
Ver
Version
Displays current software version (in two pages).
VIRT
Virtuoso console
Sets starting address for luminaire in Virtuoso systems.
Table 4-3: Menu Function Definitions (Continued)
Display
Definition
Purpose