![background image](http://html1.mh-extra.com/html/vari-lite/profile-ip-vl3600/profile-ip-vl3600_user-manual_3516600047.webp)
user manual
w w w.va r i - l i t e .co m
VL3600 PROFILE IP
47
DATA
Allows the current DMX value present on each of the luminaire’s DMX channels to be viewed.
PAN/TILT
Swap Pan/Tilt
Choose ON to have the pan mechanism controlled via the tilt DMX channels and vice versa. OFF be-
haves normally.
Invert Pan
Choose ON to reverse the direction of pan. OFF behaves normally.
Invert Tilt
Choose ON to reverse the direction of tilt. OFF behaves normally.
SELECT SIGNAL
DMX Only
Fixture only responds to DMX via the onboard XLR connector input.
ART-NET
Fixture responds to ART-NET via the onboard RJ45 connector input if set to ON.
Wireless DMX
Fixture responds to the built in Wireless DMX if set to ON and paired with appropriate transmitter.
Note:
Lumenradio CRMX devices provided by others.
WIRELESS DMX
VL3600 Profile IP comes with a built in Wireless DMX receiver. It supports Lumenradio CRMX format.
Follow their instructions to configure the transmitter and prepare for pairing.
Setup
Once you have chosen Wireless DMX from Select Signal above and have set your transmitter into its
pair mode, come here to Setup and touch [ENTER]. Choose PAIR to join the active network. Choose
UNPAIR to disconnect.
SET ART-NET
Set Universe
Select the Art-Net universe you wish to connect to (0 to 15)
Net
Select the Art-Net Net you wish to connect to (0 to 127)
Sub-Net
Select the Art-Net Sub-net you wish to connect to (0 to 15)
Ethernet IP
Choose the factory preset IP address for the fixture. IP1 will choose an IP address in the 2.xxx.xxx.xxx
range and IP2 will choose the 10.xxx.xxx.xxx. This will be based on a sub-net mask of 255.0.0.0. Manual
allows you to create a custom IP address of your choosing, ensuring you adhere to the correct sub-net
mask.