user manual
w w w.va r i - l i t e .co m
VL3600 PROFILE IP
48
Ethernet Mask IP
Allows you to set you Ethernet Sub-Net Mask if using a manual IP address.
DMX FAIL
DMX Hold
If DMX is lost, fixture will maintain its present state until DMX is restored.
Blackout
If DMX is lost, fixture will go to blackout until DMX is restored.
Goto Preset
If DMX is lost, fixture will go to the preset (1 through 20).
FIXTURE
STATUS
Shows list of error message from previous calibration. If none, it will say No Errors.
RECAL
Runs the calibration routine within the fixture. Can be performed via the control channel or RDM.
REBOOT FIXTURE
Restarts the entire operating system of the fixture. Can be performed via the control channel or RDM.
VERSION
Shows the current software version of the fixture. Version is listed in MM/DD/YY format. Can be
viewed via RDM.
FIXTURE HOURS
Shows the accumulated hours the fixture has been powered on. Can be viewed via RDM.
CROSSLOAD (SOFTWARE)
Allows the current version of software installed in the fixture to be sent to other units via an attached
DMX cable.
SERVICE
Service Settings - Password protected
This is for the use of authorized service personnel only. Refer to Service Manual for information.
USB
Log File
Saves a .csv file on the usb drive that contains information about the unit, including settings and previ-
ous error messages.
Save Config
Saves the current configuration of the fixture (including all settings) that can then be restored into
another fixture (i.e., replacing a unit in a system).