user manual
w w w.va r i - l i t e .co m
VL3600 PROFILE IP
15
Program starting address in Battery Mode:
• To activate menu in Battery Mode when the fixture is not connected to a power source, touch and hold
the MENU button, and at same time press and hold the battery enable button on the rear. Once the
screen boots you can release both and access menu normally. Pressing the MENU button from the top
level or home screen will shutoff display.
TRANSPORTING
When shipping or transporting luminaires, Vari-Lite recommends that the luminaire(s) be sufficiently protected
against any (including, but not limited to) shock, vibration, drops, jarring, exposure to the environment, etc.
Failure to sufficiently protect any Vari-Lite luminaire during shipping or transportation will result in damage
and void the luminaire’s warranty. Vari-Lite will not be responsible for any shipping damage or breakage of
any product under any circumstances. Vari-Lite will not be responsible for any third-party case manufacturer’s
cases.
Note
: As with all automated luminaires, proper handling and suitable protective shipping cases should be used
when transporting fixtures to reduce the risk of damage. For more information, please refer to Vari-Lite tech-
nical notice (TN-235) “Transportation and Shipping Case Requirements” in the “Support” area of the Vari-Lite
web site.
TRANSPORTATION AND SHIPPING CASE REQUIREMENTS
Cases to transport Vari-Lite luminaires should meet the following loading requirements:
• Luminaire head, yoke, and enclosure sub-assemblies shall be equally supported and constrained where
no one sub-assembly (head, yoke, or enclosure) fully supports the entire mass of the luminaire.
• The interior of the case shall be of high quality and uniform density foam. The foam shall be of the same
type and density throughout as to equally and uniformly support loading at every contact surface.
• The case shall, when laid on any of its six (6) surfaces, maintain the loading requirements outlined
above.
• If using the provided SIP, ensure it fits securely into the case.
• All cases not meeting the aforementioned loading requirements, with wheels, shall have markings
on the exterior of the case that the unit is to be transported on it wheels only (e.g. “Case must be
transported and remain [at all times] on its wheels”).
BATTERY
ENABLE
NETWORK 2
NETWORK 1
USB
AC INPUT
DMX/RDM THRU DMX/RDM IN