background image

7

COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class A 
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when this equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with Vari-Lite system, 
service, and safety guidelines, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful 
interference, in which case the user will be required to correct the interference at his/
her own expense.

DECLARATION OF CONFORMITY

We declare, under our sole responsibility, that this product complies with the relevant 
clauses of the following standards and harmonized documents:

SAFETY

EN 60598-1:2015 + A1:2018;
EN 60598-2-17:2018;
EN 60598-2-4:2018;
EN 62493:2015;
EN 62471:2008;
EN 62031: 2008 + A1: 2013 + A2: 2015;
EN 61347-2-11:2001;
EN 61347-1:2015 Low Voltage Directive 2014/35/EU

EMC

EN 55032:2015
EN 55103-2: 2009
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55015:2013+A1:2015
EN 61547:2009
EMC Directive 2014/30/EU

ROHS

EN 62321:2012
We certify that the product conforms to the protection requirements of council direc-
tives: Low Voltage Directive 2014/35/EU, 2014/30/EU (EMC), and Restriction of the 
use of certain Hazardous Substances in electrical and electronic equipment Directive 
(RoHS), 2015/863. Equipment referred to in this declaration of conformity was fi rst 
manufactured in 2017 in compliance with these standards.

CUSTOMER SERVICE

If you have any questions regarding this product, please contact Customer Service at 
+1-214-647-7880 or via e-mail at 

entertainment.service@signify.

LIMITED 2-YEAR WARRANTY

Vari-Lite off ers a two-year limited warranty on its control products against defects 
in materials or workmanship from the date of delivery. A copy of Vari-Lite two-year 
limited warranty containing specifi c terms and conditions can be obtained from the 
Vari-Lite website at 

www.vari-lite.com

 

or by contacting your local Vari-Lite offi

  ce.

SAFETY WARNINGS AND NOTICES

When using electrical equipment, basic safety precautions should always be followed 
including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

•  For indoor, dry locations use only. Do not use outdoors.
•  Equipment should be mounted in locations and at heights where it will not readily 

be subjected to tampering by unauthorized personnel.

•  The use of accessory equipment not recommended by the manufacturer may 

cause an unsafe condition.

•  Not for residential use. Do not use this equipment for other than intended use.
•  Refer service to qualifi ed personnel.
•  The use of accessory equipment not recommended by the manufacturer may 

cause an unsafe condition.

•  Not for residential use. Do not use this equipment for other than intended use.
•  Refer service to qualifi ed personnel. This fi xture contains no user serviceable parts.
•  Prior to fi rst use, carefully inspect unit for damage from shipping. 
•  Installation and operation to be performed by qualifi ed personnel only. 
•  Use safety tether when mounting.
•  Install only in locations with adequate ventilation of at least 50cm clearance from 

adjacent surfaces.

•  Ensure sure that ventilation slots are not blocked.
•  Ensure that the voltage and frequency of the power supply match the power 

requirements of the fi xture.

• The 

fi xture must be earthed/grounded to the appropriate conductor.

•  Do not operate fi xture outside the ambient temperature range of 0–40°C.
•  Do not connect the fi xture to any dimmer pack.
• New 

fi xtures may emit a chemical odor due to the manufacturing process. This 

odor will dissipate over time.

•  Note distance requirement(s) from combustible materials or illuminated objects.  

Do not mount near gas or electric heaters.

•  Prior to each use, carefully inspect power cables and replace any damaged cables.
•  Exterior surfaces of the luminaire will be hot during operation. Take appropriate 

precautions.

•  Continuous use of the fi xture may shorten the lifespan. Power down the fi xture 

when not in use.

• Clean 

fi xtures regularly, particularly when working in a dusty environment.

•  Never touch power cables or wires while the fi xture is powered on. 
•  Avoid entangling power wires with other cables.
•  In the event of a serious operating problem, immediately discontinue using the 

fi xture.

•  Never turn on and off  the unit time after time.
•  The housing, lenses, and/or the ultraviolet fi lter must be replaced if they are 

damaged.

•  Disconnect mains power if the fi xture is not used for a long time.
•  Original packing materials can be reused for transporting the fi xture.
• This 

fi xture is designed for dry locations only. Exposure to rain or moisture may 

damage fi xture unless it is suitably IP rated. 

•  Do not look directly at the LED light beam while the fi xture is on.
•  Equipment should be mounted in locations and at heights where it will not readily 

be subjected to tampering by unauthorized personnel.

SAVE THESE INSTRUCTIONS.

WARNING:

 

Refer to National Electrical Code® and local codes for cable specifi ca-

tions. Failure to use proper cable can result in damage to equipment or danger to 

AMERICAS

10911 Petal Street
Dallas, TX 75235
Tel: +1 214-647-7880
Fax: +1 214-647-8039

ASIA

Room 1201, Freetown Tower D
E 3rd Ring Rd S, 58
Chaoyang Qu
Beijing Shi, China
Tel: +8610-58674776
Fax: +8610-58674775

B-1-27, Dataran Cascades, No. 13A
Jalan PJU 5/1
Kota Damansara PJU 5
47810 Petaling Jaya
Selangor, Malaysia
Tel: +60 3-7611 7302

EUROPE

Rondweg Zuid 85
Winterswijk 7102 JD 
Netherlands
Tel: +31 543-542516
Fax: +31 543-542513

24 Sovereign Park
Coronation Road
Park Royal, London
NW10 7QP
United Kingdom
Tel: +44 020 8965 3209

© 2019 Signify Holding. All rights reserved.

All trademarks are owned by Signify Holding or their respective owners. The information provided herein is subject to change, without notice. Signify does 

not give any representation or warranty as to the accuracy or completeness of the  information included herein and shall not be liable for any action in re-

liance thereon. The information presented in this  document is not intended as any commercial offer and does not form part of any quotation or contract, 

unless otherwise agreed by Signify. Data subject to change. 

Summary of Contents for EVENTWASH VL800








Reviews: