3
VL800 EVENTWASH
QUICK START GUIDE
Step 4.
Connect AC Input Cable connector to power input source.
Step 5.
Dress AC input and data cables and secure them so that they will not interfere with luminaire head
and yoke movement.
INSTALLATION
FLOOR MOUNTING THE LUMINAIRE
This luminaire included in this manual are designed to sit directly in a fl oor installation application. When used
in this type of application, be sure to leave enough space around the luminaire to allow proper, uninterrupted
airfl ow for cooling and movement.
HANGING THE LUMINAIRE
The VL5LED WASH can be hung horizontally or vertically from
any structure designed to work with the type of load created by
this moving luminaire. Two mounting truss hooks or other mount-
ing hardware are required. Many compatible truss hooks are
available from diff erent manufacturers for your particular needs.
A minimum of two hooks per luminaire is required. If mounting
method does not use truss hooks, two attachment points, per
luminaire, are required.
To install mounting hardware and brackets:
Step 1.
Bolt each clamp to the Omega holder with screw and
lock nut through the hole in the holder.
NOTE:
Various types of truss hooks can be used. The Clamp (as shown) as well as many other standard hooks,
can be ordered separately.
Step 2.
Fasten the omega holders on the bottom of the base by inserting quick-lock fasteners into the holes
of the base and tighten fully clockwise.
Step 3.
Hang the fi xture to the support through clamp and faster the screws, faster the safety cable through
the bottom of the base and over the support.
WARNING!
Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the
luminaire.
