1
QUICK START GUIDE
VL800 EVENTWASH
912400575003
VL800 EVENTWASH
This document provides basic setup instructions and safety
warnings for the following product(s):
POWER CONNECTOR
VL800 EVENTWASH
QUICK START GUIDE
(this document)
WARRANTY CARD
WWW.VA R I - L I T E .CO M
©2020 Signify Holding. All rights reserved.
INCLUDED ITEMS
CLAMP
POWER AND DATA
CONNECTING POWER
The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz. Current required depends
on the AC supply voltage and product model.
NOTE:
The mating power connector is supplied; however, you will need to purchase or construct a cable ap-
propriate for your application.
FIGURE 1.
POWER CONNECTOR
Depending on the application, the luminaire’s AC input cable may require a diff erent connector. If required,
install a new connector meeting your requirements using the included wire color code reference.
WIRE*
CONNECTION
green/yellow
AC ground
blue
AC neutral
black
AC line
*International (harmonized) standard
WARNING!
DO NOT connect to three-phase service in countries with 240 volt power.
DMX in
Power in
DMX out
