1
QUICK START GUIDE
VL800
EVENTPROFILE
91200545005
VL800 EVENTPROFILE
This document provides basic setup instructions and safety
warnings for the following product(s):
WWW.VA R I - L I T E .CO M
©2019 Signify Holding. All rights reserved.
POWER CONNECTOR
VL800 EVENTPROFILE
QUICK START GUIDE
(this document)
CLAMP
WARRANTY CARD
INCLUDED ITEMS
POWER AND DATA
CONNECTING POWER
The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz. Current required depends
on the AC supply voltage and product model.
NOTE:
The mating power connector is supplied; however, you will need to purchase or construct a cable ap-
propriate for your application.
FIGURE 1.
POWER CONNECTOR
Depending on the application, the luminaire’s AC input cable may require a diff erent connector. If required,
install a new connector meeting your requirements using the included wire color code reference.
WIRE*
CONNECTION
green / yellow
Ground (earth)
blue
AC neutral
brown
AC line
*International (harmonized) standard
WARNING!
DO NOT connect to three-phase service in countries with 240 volt power.
For single-phase power at 240V RMS:
For three-phase power at 200V RMS:
CONNECTION
PIN
CONNECTION
PIN
AC neutral
X
Phase 1
X
AC line
Y
Phase 2
Y
Ground (earth)
G
Ground (earth)
G
AC power input
X
Y
G
X
Y
G
