4
VL800 EVENTPROFILE
QUICK START GUIDE
FIGURE 4.
SAFETY ANCHOR
When hanging the luminaire in a side hang position, natural convection and the designed direction of the inlet
and exhaust cooling fans dictate that the inlet should be closest to the fl oor and the exhaust should be towards
the ceiling. This eliminates the possibility of one luminaire blowing exhaust air into the inlet of the luminaire next
to it when the luminaires are side-by-side.
If the luminaires are stacked on top of one another in a side hang, a 45° enclosure orientation with the fan inlet
closest to the fl oor.
MENU OPERATION
LCD DISPLAY AND MENU SYSTEM
The VL800 Eventprofi le Luminaire’s LCD Display and Menu System provide local control for accessing the fol-
lowing fi xture’s settings:
• Address – to set the DMX address
•
Confi gure – various parameter settings, set LED, movement, display, reset defaults
•
DMX – change the map, set address,
•
Fixture – fi xture status, ReCal, reboot, software version, view fi xtures hours, crossload, service
•
Test – to test functions of parameters
•
Manual Preset – to set the intensity, all functions
The menu system is controlled at the Menu Display available at the enclosure input panel. If there are multiple
luminaires in a system, any settings or changes would need to be made at each LCD Menu as desired.
MENU CONTROLS
The menu system is controlled by an [MENU], [ENTER] and two Arrow (
▲▼
) buttons.
LCD Display
Shows all data
and settings
Ÿź
Arrow Keys (up / down)
Menu navigation / data selections
[MENU] Button
Used to access main menu paramters
[ENTER] Button
Used to select or change a setting or
data value
