Varec 2500, Installation And Operation Manual

Page: 22 / 124

2500 Automatic Tank Gauge
12 Installation and Operations Manual
Installation Steps Checklist
When installing a 2500 ATG system on a cone roof tank, complete each installation step below.
Check off a step when it is complete. Refer to “Installation Schematics” on page 21 for overall
dimensions.
Table 2: Cone Roof Tank — Installation Steps Checklist
Bolted Tank
Order Code T05, T15
Installation parts supplied include:
•
90° Elbow assembly (x2)
•
Guide Wire bottom anchor
•
Guide Wires
•
Support bracket assembly
•
Support bracket (x7)
•
gauge head and tape
•
Float
•
Guide Wire top anchors (x2)
•
Tape connectors
•
1-1/2 Deck flange
Figure 6: Bolted Tank
Step “Description” and Page Number Complete
1 “Tank Roof Entry - Cone Roof Tank” on page 23
2
“Installing Anchors and Guide Wires” on page 25
3 “Installing Support Brackets & Pipework” on page 27
4
“Installing a Gauge Head at Grade Level” on page 28
5 “Float installation on an Out-of-Service Tank” on page 30
6
“Connecting the Tape to the Float” on page 30
7 “Feeding the Tape to a Gauge Head Located at Grade Level” on page 34
8
“Install Tape in the Gauge Head” on page 35
9 “Reset the Counter” on page 40
10
“Calibrate the Counter” on page 41
11 “Initial Lubrication” on page 42
12
“Install a Transmitter and Replace all Covers” on page 42
13 “Initial Operation” on page 43