Varec 2500, Installation And Operation Manual

Page: 105 / 124

Varec, Inc. 95
Float Grounding Kit
The Float Grounding Kit positively grounds the float to the tape or cable. Connect the
grounding cable (A) to the tape clamp (point B) and float (point C) as shown in figure 2-6.
Table 10: Float Grounding Kit List
Figure 22: Float Grounding Kit Diagram
Other Accessories
Gauge Calibrator Assembly
The Gauge Calibrator allows level transmitters with absolute encoders to
be calibrated without disassembling the transmitter from the gauge head.
The calibrator is accessed by removing the counter assembly cover. By
simply turning the calibrator, the counter and the transmitter can both be
set to the proper level. The dual calibrator can be retrofitted to existing
2500 ATG installations (Part #13-08948).
Figure 23: Gauge Calibrator Assembly
Item Part # Description Qty
13-10974-006 Float Grounding Kit (Float and Tape Clamps and
Grounding Cable) 1
Float
Tape
Tape connector
Locking Tube
Clamp screw
2 required
Tape Clamp
2 required
Gauging Tape formed into "U"
Avoid bending at hole
6.00 Inch [155] piece of tape
formed into a "U"
Avoid bending at hole.
Grounding Cable
Float Grounding Clamp
3
Float
Tape
Cable
with ground connector
without ground connector
Cable Clamp
Tape Grounding Clamp
B
A
C
4