MN2000000107
Page 6
on the SATA 150 PCI Raid Card 2-Channel
5.
Follow the same instructions to connect up to two hard drives.
Device connection is now complete.
6.
Replace the computer cover and reconnect the power cord.
RAID Arrays
RAID Arrays are setup in the SATA 150 PCI RAID Card 2-Channel’s
BIOS.
RAID 0 (Striping)
This RAID array to be used on
New/Blank
hard drives. Striping will
destroy existing data on the hard drive.
Auto Configuration
is
recommended. For applications that require custom chunk size,
Manual Configuration
is offered.
Auto configuration (recommended)
The default chunk size is
64k
when selecting
Auto configuration
.
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
