MN2000000107
Page 10
Rebuilding a Failed Mirror Set
When a failure to one member occurs, you will be notified either by the
RAID BIOS
during boot or by the
SATARAID GUI
while in
Windows. The steps below will guide you in rebuilding a failed mirror
set.
1.
Replace the failed drive with one of equal or greater capacity, then
start the computer.
2.
During boot press
Ctrl+S
or
F4
to enter the RAID BIOS.
3.
Select
Rebuild Mirrored Set
then press
Enter
.
4.
Select the desired set and
then press
Enter
.
5.
When asked
Are You Sure(Y/N)?
, press
Y
to confirm.
6.
The set will be rebuilt.
Deleting RAID Arrays
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.
2.
Select
Delete RAID Set
, then press
Enter
.
3.
Select the RAID set then press
Enter
.
4.
When asked
Are You Sure(Y/N)?
, press
Y
to confirm.
