MN2000000107
Page 15
this time
, then click
Next
.
3.
Insert the driver CD, select
Install the software automatically
(Recommended)
, and click
Next
.
4.
Click
Finish
.
For Windows®XP-x64/Server 2003-x64
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the
“
PCI_IO\Sata\64-bit Windows RAID Driver
” folder, found on the
driver CD, onto a blank floppy disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
At the Windows Setup screen, press
F6
to install the RAID driver.
4.
When prompted, press
S
to specify the location of the driver.
5.
Inset the floppy disk, then press
Enter
.
6.
Select
Silicon Image SiI 3x12 SATARaid Controller (64-bit
Extended)
or
Silicon Image SiI 3x12 SATARaid Controller
(Itanium)
, then press
Enter
.
7.
Press
Enter
to finish driver installation, then follow the on-screen
